This European plastic remote controlled licenseplatehidecover frame for have lots of very useful functions:
They are standardized and fit ideally European Union license plates (EU size).
You can hide your license plates instantly, within 2 seconds. You just need to push the button on your remote controller and front and rear license plate becomes covered and invisible (together or separately).
They work even you drive very fast (we have tested them on closed racetrack up to 250 km/h or 155 mph).
You always know whether your license plates are hidden or not - product contains led controller, which shows clearly the status.
Registration / license plates can be hidden despite tough weather (rain, frost, sunshine, extreme temperature fluctuations) - frames are produced of thick and tough ABS plastic, covering material is very durable. Therefore hide cover frame are for long - term usage.
Frames looks exactly like typical car license frames, which makes them discreet and nice looking.
They are very customized and could be used in almost all vehicles (car, truck or SUV).
Keep privacy during riding on closed racetracks.
To block photo radars and red light cameras.
To block receiving speed tickets.
To sleep comfortably! :)
This is a curtain model license plate hiding system; every set has 2 license plates, plate A and plate B. There are 3 buttons (A, B and AB) on the remote controller and main unit, Press A/B button once, the A/B curtain will roll down to cover the license plate number, press again A/B, the curtain will roll up and show the license plate number. If press AB button once, you can control the two plate at the same time. There is an LED indicator show the condition of the license plate curtain status.
Safeguarding personal privacy.
Same as the common car license plate, pretty appearance and covert.
Anti-rust, stable quality, for long term use.
Fast-move, just need 2 seconds, can meet your urgent needs.
The car license plate was made by high quality car board material. High intensity, never get rust. The cushion use aging-prevents army used canvas, can completely afford the sunshine, rain, frost and any high temperature or worse environment.
Input voltage: DC 12V
Rating current: 0.6 A
Rating power: 2 W
Length of wire: 1 × 1 m, 1 × 3.8 m, 1 × 5.8 m / external indicator light: 1 m
This European plastic remote controlled license plate flipper, shifter, rotator frame for have lots of very useful functions:
Designed to fit ideally for European Union license plates (UK, Germany, Ireland, Scotland)
You can flip your license plates instantly, within 2 seconds, you just need to push the button on your remote controller and license plate will flip (together or separately)
They work even you while you drive
You always know whether your license plates are flipped or not - product contains led controller, which indicates the status
License plate flipper works despite bad weather (rain, frost, sunshine, extreme temperature fluctuations) - frames are produced of thick and tough ABS plastic and aluminium
Frames looks like typical car license frames, which makes them discreet
They are very customized and could be used in almost all vehicles (car, truck or SUV).
Why you should have one?
To keep privacy
To use in exhibitions or motor shows
For tuning studios
During riding on closed racetracks.
Car frame shifter, rotator (flipper) for automatic change of car numbers. It is a device for the automatic number plates rotation. The device allow, provides for the installation of two license plates (one fake and one real). And with the remote you can use one plate, while after pressing the button use the other license plate. Plate flippers is a universal license plate flipping bracket that will fit all vehicles. You can change the number plate on one another for auto/motor shows, exhibitions, tunning studios, secret services, event organizations, car clubs and meetings on specialized sites or racetracks. Frame shifter with a change of license plate with registration to an individual or a souvenir - a good way to stand out. Perhaps you remember the movies about James Bond, or Luc Besson's Taxi-driver who used to have a similar device installed in their cars. Many of us were fascinated when it was switched. What once was a science fiction has become a reality now. Control key is in your car in a convenient location for the driver (installation of the remote control). When a key is pressed (or the control) frame turned around 180 degrees, changing one number to another. Metal frame construction covered with tamper-resistant shifter composition. Pull out the number of such scope is much harder than plastic avtoramok, while it is not subject to corrosion and temperature extremes. The device operates not only in the dry state, but also under water. For installation with a nominal registration and license plates, which must be entered in the data sheet. You will not have to with a screwdriver in hand to change their registration numbers on the back and registered for one trip - one keystroke (control buttons). The installation procedure doesn't require cutting into the bumper or vehicle body.
If you have 2 plates - you don't have to change them with a screwdriver, only press the button and plates will be changed.
Fast moves, just needs 2 seconds to flip the frame.
Anti-rust, stable quality, for long term use, reliable mechanism.
Synchronized of (both) the front and rear frame.
The license frame was made by high quality car board material, high intensity, never get rust, can completely afford the sunshine, rain, frost and any high-low temperature or worse environment. Can work even under water.
It has regular form so that the installed device is totally unnoticeable, turning mechanism is hidden behind a removable panel.
Can run at speeds up to 200 km/h (tested).
From left to right (normally the host installed within range of the dashboard):
Power, to the accumulator
LED, to the host directly, just put it in your sight
B interface, 5 m wire to the Back frame
A interface, 3 m wire to the Front frame.
How to control the frame?
There are 4 buttons on the host, 1 power button and 3 control buttons (A, B, A/B):
Press power button, The LED indicator turns green, at the same time, indicators for the 3 control buttons turn red. Indicate that the systems in working state. When you press the control buttons, the flip frame will auto turn.
A Button: Front frame controlling. Press one time, the front frame auto turn one time, Press A button once again, the front frame will turn back to its initial state.
B button: Back frame controlling. Work the same as A.
A/B button: Front and back frames controlling. Work the same as A, but this button can control the two frames on the same time.
Every set of license plate cover frame has 2 license plates, plate A (front of the car) and plate B (rear of the car). There are 3 buttons (A, B and AB) on the remote controller and main unit, Press A or B button once, the A/B number will flip, press again A or B, the flate will fli again and will show the previous license number. If you press AB button once, you can flip both plates at the same time. There is an LED indicator showing the status of the license plate.
Voltage: DC 12V
Fixed electric current: 0.6 A
Main material performance: aviation aluminum (black) / stainless steel (1 mm) and plastic
Fixed power: 2 W
Flip Speed: changing one number into another within 2 seconds
Time of ascent and descent: less than 2 seconds
Control distance: about 50 m
Wire length: 3 (front) and 5 (back) m, external indicator light 1 m
Weight: 3 kg
Dimensions: 55 (L) × 2.5 (H) × 16 (W) cm (mounted under the bumper and trunk lid: 145 × 112 × 32 mm, number plate size is 520 × 110 mm)
2 × EU flip frames for front and rear of the car
LED controller (shows whether plates are flipped or not)
Complete set of cables (power cable can be finished like cigar lighter or to be connected directly to battery)
This is 5 inchGPSRearviewMirror with Dual Camera (DVR + AV-In + vehicle rear view Camera) and WiFi (Internet support) and Android 4.4.2 Operating System. Blue mirror, unique Ultra Thin design. Precise Capacitive Touch Screen, smooth control. Easy to install android software. Support GPS Navigation, built-in WiFi, FM transmitter, MP3/MP4 playing, multiple APP download and etc. Six In One Device with mutiple functions! With this Android WiFi Intelligent Rearview mirror, driving journey will be colorful and joyful. On 5 inches 800 × 480 TFT you can play games, watch videos, clear to see the road and no need to worry about losing your way. With built-in WiFi support (802.11 b/g/n) you can surf in the internet, watch videos, chat with IM, download what you want and update the software online. With FM Transmit function, the navigation voice and music will be directly sent to the car speaker. With this function, the sound become better and louder. Multimedia support, support most video, audio format, can do as Android Tablet, e-book, play games, etc. Dual DVR Recorder Dash Camera (1080p) and waterproof backup Camera with 6 meters cable. PIP function. Screen will automatically switch to rear view when car reversing. Dual front and rear camera can simultaneously record. With TF card slot (max support 64 GB) for DVR and parking record data storage. Please connect the car charger after start the car when you use it!