This product is suitable for the market of automobile accessory. It can support GPS navigation, wireless laser/radar detector, camera for reversing car, Bluetooth hands-free communication, AV entertainment applications. It can also be matched with car DVD, audio. It is a perfect solution for automotive electronics.
Features:
GPS navigation: 4.3'' support maps on Windows CE 6.0
Shockproof and slipproof design with new eco-friendly material pad. Comfortable feel, elegant and fashionable. Universal holder for your PDA, cell phone, iPhone 4, iPhone 3GS, iPhone, iPod, MP3, MP4, MP5, GPS, PNA.
Specifications:
Universal mounting solution for your Cell Phone (iPhone 4, iPhone 3GS, iPhone 3G, iPhone and other mobile phones) and portable device (iPod, PDA, GPS, PNA, MP3, MP4, MP5) to mount onto a vent mount on most vehicles
Fit the devices width from 4.8 to 10.5 cm
360 degree rotating support holder
Easy to installation/use: vent mount or attach on any where in your car (with included double-sided adhesive pad)
Can be mounted on the windshield or panel of car
The holder can be flicked up by pressing the button
Soft rubber pads on arms, skidproof and shockproof
This product produces ozone and anion which can rapidly eliminate the car inside soot, peculiar smell, and have force sterilization, purification air, make your car air as fresh as bathes in the forest. Ozone can dispels mildew smell, smoke smell, formaldehyde, benzene and poisonous gas discharged from automobiles. The anion is called "in the air of Vitamin", is beneficial to the health of human beings. Has the best medicine function, and can effectively reduces the cough, sneezes, asthma's incidence of a disease.
Features:
Simply pug into any automobile’s 12 volts cigar lighter.
The gentle built-in light feature creates a romantic atmosphere.
Can stick it on any level, can be used to put up mobile telephone, business cards, message papers, etc, and will not cause any damage in affxed to the surface.
Features:
Smooth and glossy surface.
Washable, removable, and reusable. Stickypad is reusable and can be washed when it gets dirty. While losing visecidity because of the dust. Cleaning and drying it, and you can use it again.
Fit for dashboard, center console or window.
Hold your cellphone, iPhone, money, sunglasses, iPod or any other personal items with flat surface.
Easy installation (place on any unpainted dashboard, center console or window), no adhesive or magnet use.
Environmental products for the production of materials, and soil contact. Will be dildegradable and non-polluting.
Fragrant smell, nontoxic, alarming adsorption power, and can be stopping the slippery cushion and sticking use of doble-sided.
Clustering elastomer, withstand high temperatures without deformation, and the temperature in the minus can use.
Specifications:
Material: High quality aircraft type soft vinyl surface elastic material polymer (PVC)
AV-in for rear view camera/video camera (optional)
Mini-USB (2.0) connection port
Active sync with your PC/Laptop
with uSD card expandable (up to 16 GB)
Built-in speaker: 8 Ω, 1 W
COM port (COM7, 38400 bps) for TMC
Auido jack earphone output
MP3/AVI/DivX/JPEG palying, formats:
Audio: MP3, WMA, WAV, MID
Video: AVI, DVIX, XVID, FLV, WMV, ASF, 3GP, MP4
Photo: JPG, GIF, BMP, PNG
eBook: TXT, XML, PDF
Microsoft WindowsCE 6.0 Pro operating system (compatible with all major GPS software packages - however hardware specific software such as Garmin may not run on this unit)
Word/Excel/PDF viewer
OSD Menu Languages: English, German, French, Spanish, Portuguese, Chinese, Japanese, Polish, Turkish, Italian, Hungarian, Czech, Danish, Norwegian, Finish, Greek, Romanian, Eesti, Latviesu, Lietuviu
Built-in 1200 mAh rechargeable Li-Ion battery: up to 3 hours active, 600 hours sleep mode
Dimensions (mm): 130 x 80 x 13 (ultra thin slim)
Weights (g): 350
Package contents:
5" High Definition iPNA GPS device with iGO and latest EU/USA/Asia/Africa/Australia maps
Car holder: Mounting bracket + Mounting bracket plate
This European plastic remote controlled license plate flipper, shifter, rotator frame for have lots of very useful functions:
Designed to fit ideally for European Union license plates (UK, Germany, Ireland, Scotland)
You can flip your license plates instantly, within 2 seconds, you just need to push the button on your remote controller and license plate will flip (together or separately)
They work even you while you drive
You always know whether your license plates are flipped or not - product contains led controller, which indicates the status
License plate flipper works despite bad weather (rain, frost, sunshine, extreme temperature fluctuations) - frames are produced of thick and tough ABS plastic and aluminium
Frames looks like typical car license frames, which makes them discreet
They are very customized and could be used in almost all vehicles (car, truck or SUV).
Why you should have one?
To keep privacy
To use in exhibitions or motor shows
For tuning studios
During riding on closed racetracks.
Car frame shifter, rotator (flipper) for automatic change of car numbers. It is a device for the automatic number plates rotation. The device allow, provides for the installation of two license plates (one fake and one real). And with the remote you can use one plate, while after pressing the button use the other license plate. Plate flippers is a universal license plate flipping bracket that will fit all vehicles. You can change the number plate on one another for auto/motor shows, exhibitions, tunning studios, secret services, event organizations, car clubs and meetings on specialized sites or racetracks. Frame shifter with a change of license plate with registration to an individual or a souvenir - a good way to stand out. Perhaps you remember the movies about James Bond, or Luc Besson's Taxi-driver who used to have a similar device installed in their cars. Many of us were fascinated when it was switched. What once was a science fiction has become a reality now. Control key is in your car in a convenient location for the driver (installation of the remote control). When a key is pressed (or the control) frame turned around 180 degrees, changing one number to another. Metal frame construction covered with tamper-resistant shifter composition. Pull out the number of such scope is much harder than plastic avtoramok, while it is not subject to corrosion and temperature extremes. The device operates not only in the dry state, but also under water. For installation with a nominal registration and license plates, which must be entered in the data sheet. You will not have to with a screwdriver in hand to change their registration numbers on the back and registered for one trip - one keystroke (control buttons). The installation procedure doesn't require cutting into the bumper or vehicle body.
Features
If you have 2 plates - you don't have to change them with a screwdriver, only press the button and plates will be changed.
Fast moves, just needs 2 seconds to flip the frame.
Anti-rust, stable quality, for long term use, reliable mechanism.
Synchronized of (both) the front and rear frame.
The license frame was made by high quality car board material, high intensity, never get rust, can completely afford the sunshine, rain, frost and any high-low temperature or worse environment. Can work even under water.
It has regular form so that the installed device is totally unnoticeable, turning mechanism is hidden behind a removable panel.
Can run at speeds up to 200 km/h (tested).
Installation
From left to right (normally the host installed within range of the dashboard):
Power, to the accumulator
LED, to the host directly, just put it in your sight
B interface, 5 m wire to the Back frame
A interface, 3 m wire to the Front frame.
How to control the frame?
There are 4 buttons on the host, 1 power button and 3 control buttons (A, B, A/B):
Press power button, The LED indicator turns green, at the same time, indicators for the 3 control buttons turn red. Indicate that the systems in working state. When you press the control buttons, the flip frame will auto turn.
A Button: Front frame controlling. Press one time, the front frame auto turn one time, Press A button once again, the front frame will turn back to its initial state.
B button: Back frame controlling. Work the same as A.
A/B button: Front and back frames controlling. Work the same as A, but this button can control the two frames on the same time.
Every set of license plate cover frame has 2 license plates, plate A (front of the car) and plate B (rear of the car). There are 3 buttons (A, B and AB) on the remote controller and main unit, Press A or B button once, the A/B number will flip, press again A or B, the flate will fli again and will show the previous license number. If you press AB button once, you can flip both plates at the same time. There is an LED indicator showing the status of the license plate.
Specifications
Power supply
Voltage: DC 12V
Fixed electric current: 0.6 A
Main material performance: aviation aluminum (black) / stainless steel (1 mm) and plastic
Fixed power: 2 W
Flip Speed: changing one number into another within 2 seconds
Time of ascent and descent: less than 2 seconds
Control distance: about 50 m
Wire length: 3 (front) and 5 (back) m, external indicator light 1 m
Weight: 3 kg
Dimensions: 55 (L) × 2.5 (H) × 16 (W) cm (mounted under the bumper and trunk lid: 145 × 112 × 32 mm, number plate size is 520 × 110 mm)
Package contents
2 × EU flip frames for front and rear of the car
Central unit
LED controller (shows whether plates are flipped or not)
Remote controller
Complete set of cables (power cable can be finished like cigar lighter or to be connected directly to battery)
This carDVR with 120° wide view angle and 6 IR LED light Camera (dashcam) captures high definition video and displays it on its rotatable 2.5 inch TFT LCD screen. The video is saved in the SD memory card. Supports recycled recording. With the camera holder / mount, you can fix it on the car dashboard or car windshield very easily. The high quality video and audio can be timely and strong evidence to address accident and distinguish responsibility. As long as the vehicle fix with it, you can easily record moving track on your way. Moreover, it can take all kinds of traffic accidents as evidence of the exercise.
Description:
Main Functions: Video and Audio Recording, Motion Detection Auto-Recording, Loop Video Recording, Photo-Taking, etc
Day / Night mode, a variety of built-in scenes for selection
Intellectual control of infrared fill light
Records automatically after the car's power up
High speed recording
Supports Real Time & Date display on video (timestamp)
Quick Snap, Quick Video Recording, Quick Review
Cycled recording and repeat storage by section. Loop video recording, that is deleting old files and then recording new ones automatically
Motion detect function: the DVR Will be recording if there is any object movement and stop recording if no movement, save memory space for you
Can be easily mounted onto the dashboard of your car.
Specifications:
Image Sensor: 1/4 color CMOS Image Sensor
120° viewing angle
2.5" TFT Colorful Monitor
Screen rotation angle: 270°
With 6 IR LED's, support night vision
Built-in microphone an speaker
Video Format: AVI, resulotion:
1280 x 960 pixels (WXGA), 30 fps (interpolated by software)
720 X 480 pixels (WVGA), 30 fps (interpolated by software)
Back flip for motorcycle. Electric motorized license platehideflipper gadget, like ones used in James Bond movies. Install this easy to use retractable license plate gadget and easily hide your license plate at motorcycle meets, shows, events, photoshoots and more. This device is great for use at shows and track events. Fits any motorcycle, scooter or ATV with any size (US, CA, UK, EU, RU, GR, AU, ...) license plate. It is 100% automatic/electric, flip a switch. Installs in no time with just a screwdriver. Comes with everything you need.
Specifications:
switch controlled, switch case can be mounted on handlebar
LED indicator shows the position of the plate
power: 12 V & 36 W (powered by your bikes battery)
materials: hi-strength plastic with black carbon foil and some steel parts
waterproof and weatherproof
tested up to 200 km/h, working even at speed over 200 km/h
secure splints
winker mount plates
flip angle: 90° degrees
plate is retained in the end positions (shown and hidden) from spring and 2 strong magnets with adjustable retained force
adjustable mounting angle
five mounting options in one product for sport, tour, enduro, cruiser and choppers
mounting plate with many holes and slots for universal fitment
See picture with dimensions to be sure that bracket can be mount on your motorcycle. Modifications may be required (mounting holes drilling or additional auxiliary details).