Shockproof and slipproof design with new eco-friendly material pad. Comfortable feel, elegant and fashionable. Universal holder for your PDA, cell phone, iPhone 4, iPhone 3GS, iPhone, iPod, MP3, MP4, MP5, GPS, PNA.
Universal mounting solution for your Cell Phone (iPhone 4, iPhone 3GS, iPhone 3G, iPhone and other mobile phones) and portable device (iPod, PDA, GPS, PNA, MP3, MP4, MP5) to mount onto a vent mount on most vehicles
Fit the devices width from 4.8 to 10.5 cm
360 degree rotating support holder
Easy to installation/use: vent mount or attach on any where in your car (with included double-sided adhesive pad)
Can be mounted on the windshield or panel of car
The holder can be flicked up by pressing the button
Soft rubber pads on arms, skidproof and shockproof
Back flip for motorcycle. Electric motorized license platehideflipper gadget, like ones used in James Bond movies. Install this easy to use retractable license plate gadget and easily hide your license plate at motorcycle meets, shows, events, photoshoots and more. This device is great for use at shows and track events. Fits any motorcycle, scooter or ATV with any size (US, CA, UK, EU, RU, GR, AU, ...) license plate. It is 100% automatic/electric, flip a switch. Installs in no time with just a screwdriver. Comes with everything you need.
switch controlled, switch case can be mounted on handlebar
LED indicator shows the position of the plate
power: 12 V & 36 W (powered by your bikes battery)
materials: hi-strength plastic with black carbon foil and some steel parts
waterproof and weatherproof
tested up to 200 km/h, working even at speed over 200 km/h
winker mount plates
flip angle: 90° degrees
plate is retained in the end positions (shown and hidden) from spring and 2 strong magnets with adjustable retained force
adjustable mounting angle
five mounting options in one product for sport, tour, enduro, cruiser and choppers
mounting plate with many holes and slots for universal fitment
See picture with dimensions to be sure that bracket can be mount on your motorcycle. Modifications may be required (mounting holes drilling or additional auxiliary details).
This product produces ozone and anion which can rapidly eliminate the car inside soot, peculiar smell, and have force sterilization, purification air, make your car air as fresh as bathes in the forest. Ozone can dispels mildew smell, smoke smell, formaldehyde, benzene and poisonous gas discharged from automobiles. The anion is called "in the air of Vitamin", is beneficial to the health of human beings. Has the best medicine function, and can effectively reduces the cough, sneezes, asthma's incidence of a disease.
Simply pug into any automobile’s 12 volts cigar lighter.
The gentle built-in light feature creates a romantic atmosphere.
This European plastic remote controlled license plate flipper, shifter, rotator frame for have lots of very useful functions:
Designed to fit ideally for European Union license plates (UK, Germany, Ireland, Scotland)
You can flip your license plates instantly, within 2 seconds, you just need to push the button on your remote controller and license plate will flip (together or separately)
They work even you while you drive
You always know whether your license plates are flipped or not - product contains led controller, which indicates the status
License plate flipper works despite bad weather (rain, frost, sunshine, extreme temperature fluctuations) - frames are produced of thick and tough ABS plastic and aluminium
Frames looks like typical car license frames, which makes them discreet
They are very customized and could be used in almost all vehicles (car, truck or SUV).
Why you should have one?
To keep privacy
To use in exhibitions or motor shows
For tuning studios
During riding on closed racetracks.
Car frame shifter, rotator (flipper) for automatic change of car numbers. It is a device for the automatic number plates rotation. The device allow, provides for the installation of two license plates (one fake and one real). And with the remote you can use one plate, while after pressing the button use the other license plate. Plate flippers is a universal license plate flipping bracket that will fit all vehicles. You can change the number plate on one another for auto/motor shows, exhibitions, tunning studios, secret services, event organizations, car clubs and meetings on specialized sites or racetracks. Frame shifter with a change of license plate with registration to an individual or a souvenir - a good way to stand out. Perhaps you remember the movies about James Bond, or Luc Besson's Taxi-driver who used to have a similar device installed in their cars. Many of us were fascinated when it was switched. What once was a science fiction has become a reality now. Control key is in your car in a convenient location for the driver (installation of the remote control). When a key is pressed (or the control) frame turned around 180 degrees, changing one number to another. Metal frame construction covered with tamper-resistant shifter composition. Pull out the number of such scope is much harder than plastic avtoramok, while it is not subject to corrosion and temperature extremes. The device operates not only in the dry state, but also under water. For installation with a nominal registration and license plates, which must be entered in the data sheet. You will not have to with a screwdriver in hand to change their registration numbers on the back and registered for one trip - one keystroke (control buttons). The installation procedure doesn't require cutting into the bumper or vehicle body.
If you have 2 plates - you don't have to change them with a screwdriver, only press the button and plates will be changed.
Fast moves, just needs 2 seconds to flip the frame.
Anti-rust, stable quality, for long term use, reliable mechanism.
Synchronized of (both) the front and rear frame.
The license frame was made by high quality car board material, high intensity, never get rust, can completely afford the sunshine, rain, frost and any high-low temperature or worse environment. Can work even under water.
It has regular form so that the installed device is totally unnoticeable, turning mechanism is hidden behind a removable panel.
Can run at speeds up to 200 km/h (tested).
From left to right (normally the host installed within range of the dashboard):
Power, to the accumulator
LED, to the host directly, just put it in your sight
B interface, 5 m wire to the Back frame
A interface, 3 m wire to the Front frame.
How to control the frame?
There are 4 buttons on the host, 1 power button and 3 control buttons (A, B, A/B):
Press power button, The LED indicator turns green, at the same time, indicators for the 3 control buttons turn red. Indicate that the systems in working state. When you press the control buttons, the flip frame will auto turn.
A Button: Front frame controlling. Press one time, the front frame auto turn one time, Press A button once again, the front frame will turn back to its initial state.
B button: Back frame controlling. Work the same as A.
A/B button: Front and back frames controlling. Work the same as A, but this button can control the two frames on the same time.
Every set of license plate cover frame has 2 license plates, plate A (front of the car) and plate B (rear of the car). There are 3 buttons (A, B and AB) on the remote controller and main unit, Press A or B button once, the A/B number will flip, press again A or B, the flate will fli again and will show the previous license number. If you press AB button once, you can flip both plates at the same time. There is an LED indicator showing the status of the license plate.
Voltage: DC 12V
Fixed electric current: 0.6 A
Main material performance: aviation aluminum (black) / stainless steel (1 mm) and plastic
Fixed power: 2 W
Flip Speed: changing one number into another within 2 seconds
Time of ascent and descent: less than 2 seconds
Control distance: about 50 m
Wire length: 3 (front) and 5 (back) m, external indicator light 1 m
Weight: 3 kg
Dimensions: 55 (L) × 2.5 (H) × 16 (W) cm (mounted under the bumper and trunk lid: 145 × 112 × 32 mm, number plate size is 520 × 110 mm)
2 × EU flip frames for front and rear of the car
LED controller (shows whether plates are flipped or not)
Complete set of cables (power cable can be finished like cigar lighter or to be connected directly to battery)
Touchscreen GPS Car DVD Player with Bluetooth - 1-DIN SIZE (50MM). A totally centralized solution for your in-car entertainment, navigation, and communication needs.
It's hard to believe that so much useful road tools can be packed into a single DIN space, but prepare to be amazed. The multi-format car DVD player allows you to enjoy your favorite movies on a large 7-inch touchscreen LCD display. And if you find yourself in a position where you've watched all your DVD's, tap the screen and watch TV. The built-in analog TV receiver lets you follow your favorite over the air TV shows.
The DVD Player comes with an interactive GPS navigation system and is Bluetooth enabled. The global positioning system uses the Win CE 5.0 environment and runs all of today's most popular GPS software packages so you can find the quickest way from point A to point B in your home language++. Or if you feel like taking the long way home, that's just a tap away too. Using Bluetooth, pair this unit up your cell phone and call up a few friends for a night of fun.
Pushing the boundaries of car DVD player innovation, whether for the resale market, VAR and OEM market, or personal use, is another amazing product at a great price, from the original source for wholesale.
At a Glance...
Car touchscreen DVD + multimedia player with huge 7-inch multi-angled TFT screen. Standard single DIN size, 50mm tall.
Native GPS navigation system for running all of todays popular GPS software.
Entertainment, navigation, and communication solution in one unit - ideal for those for whom the car is a second home.
++The unit includes an SD card with evaluation only software - you will need to purchase a GPS software package that best covers your region of the world.
Primary Function: 1-DIN Car DVD Player with large 7-inch display and Bluetooth and GPS functionality
Display Information - Screen: 7 Inch TFT LCD - Aspect Ratio: 16:9, 4:3 - Resolution: 480x234 RGB - Angle: 0 to 90 (motorized sliding display panel) - Brightness: 300 cd/m2 - Video Systems: PAL, NTSC, AUTO
Bluetooth Functions - Pair with phone - then use touchscreen interface - Dial Call - Answer Call - Volume Control - Repeated Dialed Call - Dial Received Call - Dial Missed Call - Touchscreen Keypad
GPS Information - GUI Interface: YES - 3D type - Touchscreen Interface: YES - Operating Environment: Win CE 5.0 (compatible with all major GPS software packages) - Languages: English, Traditional Chinese, Simplified Chinese, German, French, Spanish, Dutch, Hungarian, Czech, Danish, Norwegian, Swedish, Portuguese, Italian, Finnish, Romanian, Russian, Polish Important Note: Actual GPS voice and display languages depends on the GPS software package you choose to use
Audio Information - Max Audio Output: 50W x 4 - Signal-To-Noise Ratio (SNR): >80dB - User adjustable EQ, Bass, Treble, Fade and Balance
AM/FM Radio Tuner - RDS System: YES - Channel Storage: YES (30 stations) - AM Frequency Range: worldwide - FM Frequency Range: worldwide
TV Tuner Information - TV Type: Analog - Channel Storage: YES (30 stations) - Tuner Frequency Bands: VHF-L, VHF-H, UHF - Color Systems: NTSC, PAL (B/G, I/I, D/K), SECAM (B/G, D/K, L)
Front Panel Buttons/Controls - Power ON/OFF - FWD/Next - REV/Previous - Play/Pause - Rotary Knob (volume/adjustment select) - Screen Angle Adjust (UP/DOWN) - SRC - MIC - Answer Call - Reject/Hang Up - Mini-USB port - Eject Disc - 3.5mm AUX IN
Media Inputs - SD/MMC card slot - Mini-USB port - DVD/CD disc slot
Rear Cable/Wire Connections - GPS Antenna IN - Radio Antenna IN - TV Antenna IN - RCA Audio OUT (front L and R) - RCA Audio OUT (rear L and R) - Aux Video IN (yellow) - AUX Audio L/R IN (red, white) - Rearview Camera IN (yellow) - Video OUT 1 - Video OUT 2 - XBS BASS OUT - Left front speaker x2 - Right front speaker x2 - Left rear speaker x2 - Right rear speaker x2
Dimensions: 182mm x 162mm x 50mm (L x D x H); depth = 200mm including front panel
(1 Pair) 2 x 5 W 12 V Cardoorlightlogoprojector, light laser lamp, decorative lighting. When opening the door, you will see LED light projection like welcoming you, and emanating charmingly. As the decoretived shadow light, when you stop the car, shadow could be showed on the road. Bring more driving fun to drivers. Elegance for your lovely car, leading the trends of car lighting sources. This fashion is popular among the young and car enthusiasts. Automobile decorative lighting, provide you with delightful light visual experience and more driving fun. The dazzle logo light will display on the ground when you open the door; and will turn of when you close the door. It can be installed in both left and right door. Courtesy door light make your car artistic moreover that atmosphere. Embedded type design will not destroyed the original car appearance. This product is specially designed for auto modification fancier, we purpose to bring more driving fun to drivers. The product can be installed at the body kit, chassis or other suitable place.
Power: 5 W
Rated voltage: 12 V (fit all 12 V vehicles such as Cars, Trucks, SUVs, and etc.)
Dimensions: 6.5 (length) x 2 (ø) cm
No noise, no pollution without electronic interference, with the German advanced constant-current control technology and shine even, light color full, lasting constant
Suitable for multiple models are (Honda, Mazda, Nissan, Toyota, Lexus, Kia, Hyundai, Volkswagen, BMW, Buick, Ford, Jeep, Porsche, Lamborghini, Ferrari, Infinite, HKS, ABT, IIIM, JP, GARSON, FOX and so on various graphics), please choose by the order comment!