Hardware

English Deutsch Italian French Español Português Русский 
Cart
 
 
 
 
 
        Antique, Art
        Cadeau
        Car
        DVD Movies
        Electronics
        Game
        Green Power
        Hardware
          - Accessories
          - Coin Mining
          - Controllers
          - CPU
          - Data Storage
          - Graphics Cards
          - Keyboards
          - Memory
          - Motherboards
          - Mouse
          - Network
          - Notebook
          - Tablet
          - Webcam
        Health & Beauty
        Hello Kitty
        Household
        Hungaricum
        Interior Design
        Mode
        Navigation (GPS)
        Party Supplies, Decorations
        Phones
        Retro
        Software
        Sport
        Spy & Security Technics
        Tablets
        Travel
        Watch
 
Hardware
Accessories
Accessories
Coin Mining
Coin Mining
Controllers
Controllers
CPU
CPU
Data Storage
Data Storage
Graphics Cards
Graphics Cards
Keyboards
Keyboards
Memory
Memory
Motherboards
Motherboards
Mouse
Mouse
Network
Network
Notebook
Notebook
Tablet
Tablet
Webcam
Webcam
FEATURED PRODUCTS
Wireless-N WiFi Signal Repeater Router Expander and Access Point (802.11 b/g/n, 300 Mbps, 2 dBi Antennas, Wall Powered) Wireless-N WiFi Signal Repeater Router Expander and Access Point (802.11 b/g/n, 300 Mbps, 2 dBi Antennas, Wall Powered)


The Wireless-N Repeater is mainly used for providing WiFi service in big area such as factory, community, hotel, school, office, street or etc. It complies with the IEEE 802.11n standard with wireless transmission speeds of up to 300 Mbps. It has 2 dBi ceramic chip Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature. It also works well with other 802.11g and 802.11n protocol wireless products.
The unique universal power adapter design in the world. Save your space, no wiring, more convenient, more beautiful!

Features:

  • Improve wireless coverage in all WLAN networks
  • Access to the Internet for computers located on the edge or outside of the range of your access point
  • Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards
  • Provides up to 300 Mbps transmission rates
  • Support 2.4 GHz WLAN networks
  • Maximum WLAN security with WPA2, WPA and WEP (128/64)
  • Software wizard for simple setup
  • 2 dBi antennas integrated
  • Support Wireless Repeater Mode and Standard AP Mode
  • Provides one 10/100 Mbps Auto-Negotiation Ethernet LAN ports

System requirements:

  • WLAN access point/client according to IEEE 802.11n/g/b
  • 110 ~ 230 V socket
  • The WLAN client must support at least the WPA encryption standard
  • WLAN access point and the WLAN client with automatic IP address assigment (DHCP)
  • Forwarding of IPv4-based protocols/Address Resolution Protocol
  • The network name (SSID) of the WLAN access point must be set to broadcast (visible)

Specifications:

  • Plug Stand: exchangeable (EU / UK / US / AU)
  • Color: White
  • Frequency range: 2.4 ~ 2.4835 GHz
  • Wireless transmit power: 14 ~ 17 dBm (typical)
  • Power supply unit: 100 ~ 240 V AC
  • Operating temperature: 0 ~ 40 °C (32 F ~ 104 F)
  • Storage temperature: -40 ~ 70 °C (-40 F ~ 158 F)
  • Relative humidity: 10 ~ 90 % (Non Condensation)
  • Product dimensions: 11 × 6 × 7 cm
  • Product weight: 98 g

Package contents:

  • 1 × Wireless-N Repeater
  • 1 × Networking cable (1 m)
  • 1 × User's Manual
  29 €  Wireless-N WiFi Signal Repeater Router Expander and Access Point (802.11 b/g/n, 300 Mbps, 2 dBi Antennas, Wall Powered)   Wireless-N WiFi Signal Repeater Router Expander and Access Point (802.11 b/g/n, 300 Mbps, 2 dBi Antennas, Wall Powered)
Hello Kitty Mouse (USB, optical, 3D, 1200 dpi, for Laptop and PC) Hello Kitty Mouse (USB, optical, 3D, 1200 dpi, for Laptop and PC)


Hello Kitty design optical USB mouse with blue/red light.

  • Plug & Play: simply plug the USB cable into an available USB port on your laptop or desktop computer and the mouse will be used immediately thereafter (don't need driver and installation)
  • compatible with Windows (9x/2k/ME/XP/Vista/NT 4.0/7/8/8.1/10) and Mac OS X operating systems
  • 1200 DPI optical resolution
  • 3 button layout, scroll wheel acts as third button
  • with USB plug, about 143 cm length of cable
  • Size: 7.5 × 6.5 × 3 cm
  • Weight: 64 g
Hello Kitty optical USB mouse
  13 €  Hello Kitty Mouse (USB, optical, 3D, 1200 dpi, for Laptop and PC)   Hello Kitty Mouse (USB, optical, 3D, 1200 dpi, for Laptop and PC)
AllFine Fine9 Glory 9" Tablet Phone Phablet PC (Android 4.2, RK3188 Quad Core 1.6 GHz CPU, 2 GB DD3 RAM, 32 GB Nand Flash, 9" Retina IPS Full HD 1920 x 1280 Capacitive Multi 10-point Touch Screen, GPS, Built-in 3G Phone Calling/Internet, WiFi/Bluetooth, 5.0/2.0 MP Back/Front Camera, HDMI, OGT) AllFine Fine9 Glory 9" Tablet Phone Phablet PC (Android 4.2, RK3188 Quad Core 1.6 GHz CPU, 2 GB DD3 RAM, 32 GB Nand Flash, 9" Retina IPS Full HD 1920 x 1280 Capacitive Multi 10-point Touch Screen, GPS, Built-in 3G Phone Calling/Internet, WiFi/Bluetooth, 5.0/2.0 MP Back/Front Camera, HDMI, OGT)


General
Brand AllFine
Model Fine9 Glory
Color White
Material Plastic
Specification
OS Android 4.2.1 (Jelly Bean)
CPU Rockchip RK3188 ARM Cortex-A9 négymagos 1.6 GHz
GPU Mali-400 MP4@500 MHz (OpenGL ES 1.1/2.0, OpenVG 1.1)
RAM 2 GB DDR3 SDRAM
Flash ROM 32 GB
External Storage TF Card, max 32 GB
Screen 9.0" 1280 × 1920 (Full HD) IPS Gorilla Glass G/G Retina 10-point (multi touch) Capacitive Touch Screen
3G WCDMA 2100 MHz
2G 850/900/1800/1900 MHz (Quad band)
GPS Yes (Built-in)
Gravity Sensor Yes (3-axis)
Supported Network WiFi, Built-in 3G/2G, Bluetooth, USB LAN
Wi-Fi Standard IEEE 802.11 b/g/n
Bluetooth V4.0 (Built-in)
RJ45 (Ethernet) No
USB LAN Yes (with USB network card)
Microphone Yes (Built-in)
Audio Output 3.5 mm
Speaker 2 × Built-in 8 Ω / 1 W high-fidelity speakers
HDMI HDMI 1.4
Dual Camera Front: 2.0 MP
Back: 5.0 MP
Photoflash Lamp No
Google Play (Android Market) Yes
USB Charge No
Image formats BMP, GIF, JPEG, JPG, PNG
Audio formats MP3, WMA, WAV, MP2, OGG, AAC, M4A, MA4, FLAC, APE, 3GP
Video formats WMV, AVI (H.264, DIVX, XVID), MKV, MPEG, MPG, MOV, ASF, MP4 (H.264, MPEG, DIVX, XVID), DAT (VCD), VOB (DVD), RM, RMVB, FLV (H.263, H.264), TS, TP, 3GP, etc
E-book PDF, TXT, FB2, PDB, EPUB, HTML
Office Word, Excle, Powerpoint
Button Power, Reset, Sound
Interface 1 × micro USB 2.0/OTG port (support U-disk, mouse, keyboard)
1 × 3,5 mm-es earphone jack
1 × 1080p mini HDMI output (19 pin)
1 × SIM card slot
1 × TF card slot
1 × DC (5 V) jack input
Other Features
Supported Languages (26) Čeština, Dansk, Deutsch, Nederlands, English, Español, Filipino, Soumen, Français, ελληνική, Hebrew, Italiano, Japanese, Korean, Magyar, Malay, Norsk, Persian, Polski, Português, Română, Pусский, Simplified/Traditional Chinese, Slovenský, Svenska, Thai, Türk, Vietnamese
Functions Applications 2G/3G call, Vidao call, GPS, Wi-Fi, Bluetooth, MP3/MP4 player, 3Dgames, YouTube, Facebook, Twitter, MSN, Android Market, Google Mail, Google Maps, Browser, Voice Recorder, Office, Calculator, Calendar, Alert, E-book reader, FM radio
Battery 3.7 V / 7500 mAh Li-polymer battery
Working Time 5 ~ 7 hours (WiFi: 6 hours, 3G: 5 hours)
Standby Time 100 hours
Charging Time 4 ~ 6 hours
 
Dimensions & Weight
Dimensions 9.13 × 6.18 × 0.43 in (23.2 × 15.7 × 1.1 cm)
Weight 29.45 oz (835 g)
 
Packing List
1 × Tablet PC
1 × Wall charger
1 × USB cable (73 cm)
1 × OTG cable (4.5 cm)
1 × English user's manual
  210 €  AllFine Fine9 Glory 9" Tablet Phone Phablet PC (Android 4.2, RK3188 Quad Core 1.6 GHz CPU, 2 GB DD3 RAM, 32 GB Nand Flash, 9" Retina IPS Full HD 1920 x 1280 Capacitive Multi 10-point Touch Screen, GPS, Built-in 3G Phone Calling/Internet, WiFi/Bluetooth, 5.0/2.0 MP Back/Front Camera, HDMI, OGT)   AllFine Fine9 Glory 9" Tablet Phone Phablet PC (Android 4.2, RK3188 Quad Core 1.6 GHz CPU, 2 GB DD3 RAM, 32 GB Nand Flash, 9" Retina IPS Full HD 1920 x 1280 Capacitive Multi 10-point Touch Screen, GPS, Built-in 3G Phone Calling/Internet, WiFi/Bluetooth, 5.0/2.0 MP Back/Front Camera, HDMI, OGT)
PS/2 Hardware Keylogger PS/2 Hardware Keylogger


PS/2 hardware keylogger released! The most advanced PS/2 hardware keylogger available on the market. This keystroke recorder comes in a standard version - 8 MB memory capacity, 8,000,000 keystrokes (over 4,000 pages of text), and a Venom version 2 billion keystrokes (over 1 million pages of text), organized into an advanced flash FAT file system.

This hardware keylogger features a text menu with loads of options for analyzing recorded data. Additionally, the USB Download Accelerator is included for super-fast retrieving of logged data. The keystroke logger is completely transparent to computer operation, no software or drivers are required. Supports national keyboard layouts.

Features

* Huge memory capacity, organized as an advanced flash FAT file system
* Advanced text menu for viewing recorded data, includes Net Detective, Phrase Search, Key Filtering, Unplug Counter and more!
* Super fast memory contents download with USB Download Accelerator (included)
* Invisible to computer operation, undetectable for security scanners
* No software or drivers required, Windows & Linux compatible
* Quick and easy national layout support
* Ultra compact and discrete, only 1.9" (48 mm) long

Applications

* Observe WWW, E-mail & chat usage by children and employees
* Monitor employee productivity
* Protect your child from on-line hazards and predators
* Save a copy of typed text
* ...and several more, see keystroke recorder benefits

  54 €  PS/2 Hardware Keylogger   PS/2 Hardware Keylogger
Samsung USB 3.0 128 GB miniature Flash Drive Fit (130 MB/s) Samsung USB 3.0 128 GB miniature Flash Drive Fit (130 MB/s)


With Samsung USB 3.0 Flash Drive Fit 128 GB your works, data, images, videos - due small physical size and high storage capacity - always it can be with you. Due the keychain design you don't have to worry to leave anywhere.

[MUF-128BB/EU] Samsung USB 3.0 128 GB miniature Flash Drive Fit (130 MB/s)

When form and function collide

The Samsung USB 3.0 Flash Drive Fit features a high-quality, metal-based design for durability and a super-compact body, for a drive that’s perfect to take in the car, to work, or anywhere you go. And with Samsung reliability, you know your data is safe.

Slim and sophisticated

With a modern ultra-compact, metal-based design, the Samsung USB 3.0 Flash Drive Fit offers a professional, streamlined solution to store and protect all of your important data.

Samsung reliability safeguards your files

The newest in the Samsung family of memory products, this USB flash drive offers NAND flash technology, 5-proof durability, and a 5-year warranty. It’s all the quality you’ve come to expect from Samsung, the trusted name for memory.

[MUF-128BB/EU] Samsung USB 3.0 128 GB miniature Flash Drive Fit (130 MB/s)

The flash drive for the future

Staying ahead of the industry, Samsung debuts the next generation SuperSpeed USB 3.0 flash drive for fast data transfer and backup with backwards compatibility with USB 2.0. (Attention: Actual data rates may vary depending on operating environment and other factors!)

Multi-purpose memory

The streamlined Samsung USB 3.0 Flash Drive FIT is the ideal companion for ultra-thin notebooks, smart TVs, and tablets, plus it’s compact enough to take anywhere-in the car or in your pocket.

Specifications:

  • Product type: USB 3.0 Flash Drive
  • Family line: Fit
  • Application:
    • Home, travel, work, entertainment, etc.
    • PC, Notebook (connect with ultra-thin PCs and netbooks), car, Smart TV, etc.
  • Capacity: 128 GB [1 GB = 1 billion byte] (Attention: Actual usable capacity may be less, due to formatting, operating system, applications or otherwise!)
  • Speed: up to 130 MB/s transfer speed (Attention: Actual speed may vary depending on use host device conditions and environment!)
  • Interface: USB 3.0 (USB 2.0 backward compatible)
  • Connector: Standard A
  • 5-proof protection:
    • Water (1m depth 3% NaCl salt water 72 hrs)
    • Heat (-10 ~ 70 °C)[MUF-128BB/EU] Samsung USB 3.0 128 GB miniature Flash Drive Fit (130 MB/s)
    • Shock (1500 g acceleration, 0,5 ms duration time)
    • X-ray (80KV, 50uA, 4W, 500 sec radiation time)
    • Magnetic (15 000 gauss)
    (Attention: USB flash drive connections must be dry when in use, if moisture is present a short-circuit may occur!)
  • Warranty: 5 years limited
  • Dimension (W × H × D): 15,44 × 19,67 × 8,7 mm
  • Weight: approx 2,6 g
  40 €  Samsung USB 3.0 128 GB miniature Flash Drive Fit (130 MB/s)   Samsung USB 3.0 128 GB miniature Flash Drive Fit (130 MB/s)
Bitmain Antminer Asic Miner U2 USB 2 GH/s (overclockable up to 2.4 GH/s, for BitCoin [BTC] Mining: SHA256) Bitmain Antminer Asic Miner U2 USB 2 GH/s (overclockable up to 2.4 GH/s, for BitCoin [BTC] Mining: SHA256)


The Bitmain Antminer U2 is a USB Bitcoin (BTC) miner that hashes at 2 GH/s, but overclocks up to 2.4 GH/s, with heatsink. The miner is very power efficient, pulling only 2.95 watts. This is a great way to enter the bitcoin mining game. Plug it into a USB, run CGMiner or BFGMiner, and you're set!

Specifications:

  • For only Bitcoin mining
  • Icuras support SHA256 algorithm
  • 2014 model: v1.2 board
  • Default hash rate: 2 GH/s, can overclock by command up to 2.4 GH/s
  • Power consumption: 2.95 W on USB 5V @ 2G
  • Power supply: 5 V DC input (from USB)
  • Factory heatsink for stable operation
  • Size: 60 × 25 × 15 mm

How to use?

You can use with your computer / laptop (supported OS: Windows, Linux, Mac OS X) or direct with router (OpenWrt / DD-WRT).
Required driver: CP210x USB
Plug in your Antniner U2 to a USB port on your computer / laptop / router.
Start mining software:

cgminer.exe --bmsc-options 115200:20 -o pool_url:pool_port -u worker_name -p worker_password --bmsc-freq 0981
bfgminer.exe -o pool_url:pool_port -u worker_name -p worker_password -S antminer:all --set-device antminer:clock=x0981

To overclock your Antniner U1, you will change that last part of the running parameter. The number following bmsc-freq and antminer:clock=x will change:

  • for 2.0 GH/s use 0981 (default)
  • for 2.1 GH/s use 0A01
  • for 2.2 GH/s use 0A81
  • for 2.3 GH/s use 0B01
  • for 2.4 GH/s use 0B81

Keep in mind that the Antminer gets very hot very quickly when you overclock. Your must add additional cooling to your device. I recommend a strong fan blowing cool air directly onto your Antminer U2!

  47 €  Bitmain Antminer Asic Miner U2 USB 2 GH/s (overclockable up to 2.4 GH/s, for BitCoin [BTC] Mining: SHA256)   Discontinued products
Sony Vaio VPC-F13L8E/H Sony Vaio VPC-F13L8E/H


  891 €  Sony Vaio VPC-F13L8E/H   Sony Vaio VPC-F13L8E/H
Foscam FI8918W Wireless CCTV Security IP Camera (Internet, WiFi, Audio, Pan/Tilt, 10 IR LEDs) Foscam FI8918W Wireless CCTV Security IP Camera (Internet, WiFi, Audio, Pan/Tilt, 10 IR LEDs)


Improved features of Foscam FI8918W as below (compared to FI8908W):

  • Nicer looking appearance
  • Add IR-LEDs software switch, the IR-LEDs could be shut off or on by software switch.
  • Move the signal green LEDs to the back of the camera
  • Add power indication LED on the back of the camera
  • Wider pan degree up to 300 degree on horizon.
  • Add Mic Jack & Speaker Jack on the back of the camera
  • Move the built-in mic to the bottom of the camera, separated from the speaker on the head, which has better audio than FI8908W.

Features:

  • High image & video quality,Two-way audio monitor
  • High-sensitivity 1/4" CMOS sensor (300k pixels)
  • Allow remote Pan/Tilt control (Pan: 300° & Tilt: 120°)
  • Microphone and Speaker built-in
  • Auto IR-LED night vision up to 8 m (25 ft)
  • Motion detection alert via email or upload image to a specified FTP server
  • 1-way external sensor input & 1-way alarm output
  • Support a wide range of browsers (IE, Firefox, Google Chrome).
  • Support remote Pan/Tilt control and remote viewing & record.
  • Support image fullsceen and image snapshot
  • Multi-level users management and passwords definition
  • Embeded Web Server
  • WEP,WPA and WPA2 Encryption
  • Optimized MJPEG video compression for transmission
  • Support wireless network (WiFi/802.11 b/g)mobile
  • Supporting Dynamic IP (DDNS)and UPnP LAN and Internet(ADSL,Cable Modem)
  • Multi-Protocol support and Transportation (such as TCP/IP, SMTP and HTTP)
  • Support Mobile Phone View & P/T Control such as Iphone & Smart phone (It should support MIDP 2.0 Java mobile or PDA mobile)
  • Simple to setup, Friendly GUI, DIY installation.

Specification:

Image Sensor Image Sensor 1/4" Color CMOS Sensor
Disaplay
Resolution
640 x 480 Pixels (300k Pixels)
Lens f: 3.6mm, F: 2.4 (IR Lens)
Min Illumination 0.5 Lux
Lens Lens Type Glass Lens
Viewing Angle 67 Degree
Audio Input Built-in Microphone
Output Built-in Speaker
Audio
Compression
ADPCM
Video Image
Compression
MJPEG
Image Frame
Rate
15 fps (VGA),30 fps (QVGA)
Resolution 640 x 480 (VGA), 320 x 240 (QVGA)
Flip Mirror
Images
Vertical / Horizontal
Light Frequency 50Hz, 60Hz or Outdoor
Video Parameters Brightness, Contrast
Communication Ethernet One 10/100Mbps RJ-45
Supported
Protocol
HTTP, FTP, TCP/IP, UDP, SMTP, DHCP, PPPoE, DDNS, UPnP, GPRS
Wireless
Standard
IEEE 802.11b/g
Data Rate 802.11b: 11 Mbps, 802.11g: 54 Mbps
Wireless Security WEP & WPA/WPA2 Encryption
Physical Pan/Tilt Angle Horizontal: 300° & Vertical: 120°
Infrared Light 11 IR LEDs,Night visibility up to 8 metres
Dimension 110 (L) x 100 (W) x 108 mm (H)
Gross Weight 768g (Color Box Size: 200 x 124 x 189 mm)
Net Weight 418g (accessories included)
Power Power Supply DC 5V/2A (EU, UK, US, AU types)
Power
Consumption
5 Watts (max)
Environment Operate Temper. 0° ~ 55°C (14°F ~ 122°F)
Operating
Humidity
20 % ~ 85 % non-condensing
Storage
Temperature
-10°C ~ 60° (14°F ~ 140°F)
Storage Humidity 0 % ~ 90 % non-condensing
PC
Requirements
CPU 2.0GHZ or above (suggested 3.0GHz)
Memory Size 256MB or above (suggested 1.0GHz)
Display Card 64M or above
Supported OS Microsoft Windows 2000/XP/Vista
Browser IE 6,7,8+, Firefox or other standard browsers
Certification CE, FCC

Package included:

  • 1 x IP camera
  • 1 x Mounting Bracket
  • 1 x Wi-Fi antenna
  • 1 x Network cable
  • 1 x DC power supply (5V)
  • 1 x User manual
  • 1 x CD
  89 €  Foscam FI8918W Wireless CCTV Security IP Camera (Internet, WiFi, Audio, Pan/Tilt, 10 IR LEDs)   Foscam FI8918W Wireless CCTV Security IP Camera (Internet, WiFi, Audio, Pan/Tilt, 10 IR LEDs)
Corsair Dominator-GT DDR3 PC3-16000 (2000 MHz) 6 GB (3 X 2 GB) low-voltage 8-8-8-24 TriKiT Corsair Dominator-GT DDR3 PC3-16000 (2000 MHz) 6 GB (3 X 2 GB) low-voltage 8-8-8-24 TriKiT


  • Three matched 2 GB modules for use in high performance Intel Core i7 Triple Channel systems
  • Outrageously fast 2000 MHz performance using 6GB of memory
  • Ultra-low 8-8-8-24 latency
  • Intel XMP (Extreme Memory Profile) Support
  • Airflow Fan
  • Density: 6 GB (3 x 2 GB Module)
  • Speed: 2000MHz
  • Timing: 8-8-8-24
  • Type: DDR3
  • Format: DIMM
  • Pin Out: 240
  • Pin Voltage: (low-voltage) 1.65 V
  407 €  Corsair Dominator-GT DDR3 PC3-16000 (2000 MHz) 6 GB (3 X 2 GB) low-voltage 8-8-8-24 TriKiT   Corsair Dominator-GT DDR3 PC3-16000 (2000 MHz) 6 GB (3 X 2 GB) low-voltage 8-8-8-24 TriKiT
PAP2T Internet Phone Adapter with 2 VoIP Ports PAP2T Internet Phone Adapter with 2 VoIP Ports


The incredible cost savings of Internet telephone service isn't limited only to those with IP phones. Part of Cisco Small Business Voice Gateways and ATAs, the PAP2T offers the benefits of high-quality voice over IP (VoIP) without the need to upgrade your existing analog phones.

The PAP2T features two standard analog, fax-friendly telephone ports which operate as separate lines, complete with individual phone numbers. All the features you've come to expect are here, such as call waiting, caller ID, voicemail, and more. It's easy to select your preferred free local-dialing area code, or even add a virtual number from anywhere to be forwarded to your Internet phone.

Additional features of the Cisco PAP2T Internet Phone Adapter include:

  • High-quality, feature-rich telephone service over your broadband Internet connection
  • Two standard telephone ports for analog phones or fax machines that serve as separate lines, complete with unique phone numbers
  • Up to 256-bit AES encryption for data transmissions and password-protected administrative options
  • Compatibility with all common telephone features such as caller ID, call waiting and voicemail.

Feature-Rich VoIP Service Through Your High-Speed Internet Connection!

Highlights

  • Enables high-quality feature-rich voice over IP (VoIP) service through your broadband Internet connection
  • Dual standard telephone ports for use with analog phones or fax machines, with independent phone numbers
  • High-quality, clear-sounding voice, using advanced voice quality of service (QoS) capability
  • Compatible with all common telephone features, such as caller ID, call waiting, and voicemail

Figure 1. Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports

Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports

Product Overview

The Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports (Figure 1) enables high-quality feature-rich VoIP service through your broadband Internet connection. Just plug it into your home router or gateway and use the two standard telephone ports to connect analog phones or fax machines. Each phone port operates independently, with separate phone service and phone numbers, like having two telephone lines. You'll get clear reception and reliable fax connections, even while using the Internet.
With Internet telephony, along with low domestic and international phone rates, impressive arrays of special telephone features are available. Choose your preferred local dialing number, regardless of where you live. Or add a virtual telephone number to have forwarded to your Internet phone. You can even add a toll-free number. The Cisco PAP2T Internet Phone Adapter is compatible with these and all of the other special telephone features that are available from your Internet telephone service provider, such as caller ID, call waiting, voicemail, call forwarding, distinctive ring, and much more.

Features

Telephony:

• Two voice ports (RJ-11) for analog phones or fax machines
• Impedance agnostics - eight configurable settings
• Call waiting, cancel call waiting, call waiting caller ID
• Caller ID with name/number (multinational variants)
• Caller ID blocking
• Call forwarding: no answer, busy, all
• Do not disturb
• Call transfer
• Three-way conference calling with local mixing
• Message waiting indication - visual and tone based
• Call return
• Call back on busy
• Call blocking with toll restriction
• Delayed disconnect
• Distinctive ringing - calling and called number
• Off-hook warning tone
• Selective/anonymous call rejection
• Hot line and warm line calling
• Speed dialing of eight numbers/addresses
• Music on hold

Specifications:

Table 1 contains the specifications and package contents for the Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports.

Table 1. Specifications for the Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports

Specifications

*Note: Many specifications are programmable within a defined range or list of options. Please see the PAP2T Administration Guide for details. The configuration profile is uploaded to the PAP2T at the time of provisioning.

Data networking

• MAC address (IEEE 802.3)

• IPv4 (RFC 791) upgradeable to v6 (RFC 1883)

• Address Resolution Protocol (ARP)

• DNS-A record (RFC 1706), SRV record (RFC 2782)

• Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)

• Internet Control Message Protocol (ICMP) (RFC 792)

• TCP (RFC 793)

• User Datagram Protocol (UDP) (RFC 768)

• Real Time Protocol (RTP) (RFC 1889) (RFC 1890)

• Real Time Control Protocol (RTCP) (RFC 1889)

• Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791/1349)

• Simple Network Time Protocol (SNTP) (RFC 2030)

Voice gateway

• Session Initiation Protocol (SIP) v2 (RFC 3261, 3262, 3263, 3264)

• SIP proxy redundancy - dynamic via DNS SRV, A records deregistration with primary SIP proxy server

• SIP support in network address translation (NAT) networks (including Serial Tunnel [STUN])

• Highly secure (encrypted) calling via prestandard implementation of Secure RTP

• Codec name assignment

Voice algorithms

• G.711 (A-law and μ-law)

• G.726 (16/24/32/40 kbps)

• G.729 A

• G.723.1 (6.3 kbps, 5.3 kbps)

• Dynamic payload

• Adjustable audio frames per packet

Fax capability

• Fax tone detection pass-through

• Fax pass-though - using G.711

• Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833) (SIP info)

• Flexible dial plan support with interdigit timers and IP dialing

• Call progress tone generation

• Jitter buffer - adaptive

• Frame loss concealment

• Full duplex audio

• Echo cancellation (G.165/G.168)

• Voice activity detection (VAD) with silence suppression

• Attenuation/gain adjustments

• Flash hook timer

• Message waiting indicator (MWI) tones

• Visual messaging waiting indicator (VMWI) via frequency shift keying (FSK)

• Polarity control

• Hook flash event signaling

• Caller ID generation (name and number) - Bellcore, DTMF, European Telecommunications Standards Institute (ETSI)

• Music on hold client

• Streaming audio server - up to 10 sessions

Security

• Password-protected system reset to factory default

• Password-protected administrator and user access authority

• Provisioning/configuration/authentication:

• HTTPS with factory-installed client certificate

• HTTP digest - encrypted authentication via MD5 (RFC 1321)

• Up to 256-bit Advanced Encryption Standard (AES) encryption

Provisioning, administration, and maintenance

• Web browser administration and configuration via integral web server

• Telephone keypad configuration with interactive voice prompts

• Automated provisioning and upgrade via HTTPS, HTTP, Trivial File Transfer Protocol (TFTP)

• Asynchronous notification of upgrade availability via NOTIFY

• Nonintrusive, in-service upgrades

• Report generation and event logging

• Stats in BYE message

• Syslog and debug server records - per-line configurable web browser

Physical interfaces

• One 10BASE-T RJ-45 Ethernet port (IEEE 802.3)

• 2 RJ-11 FXS phone ports - for analog circuit telephone device (tip/ring)

Subscriber line interface circuit (SLIC)

• Ring voltage: 40-55 volts root mean square (Vrms) configurable *

• Ring frequency: 10-40 Hz *

• Ring waveform: trapezoidal and sinusoidal *

• Maximum ringer load: 3 ringer equivalence numbers (RENs)

• On-hook/off-hook characteristics:

• On-hook voltage (tip/ring): -50V nominal

• Off-hook current: 25 mA min

• Terminating impedance: 8 configurable settings, including North America 600 ohms, European CTR21

Regulatory compliance

FCC (Part 15, Class B), cUL, CE, IC-003, A-Tick

Power supply

• DC input voltage: +5V DC at 2.0A max.

• Power consumption: 5W

• Switching type (100-240V) automatic

• Power adapter: 100-240V - 50-60 Hz (26-34 VA) AC input, 1.8 m cord

Indicator lights/LED

Phone1, Phone2, Internet, Power

Documentation

• Quick-start installation and configuration guide

• User guide

• Administration guide - service providers only

• Provisioning guide - service providers only

Environmental

Dimensions

W x H x D

3.98 x 3.98 x 1.10 in.

(101 x 101 x 28 mm)

Unit weight

5.40 oz (153 g)

Operating temp.

32º to 113ºF (0º to 45ºC)

Storage temp.

-77º to 158ºF (-25º to 70ºC)

Operating humidity

10% to 90% noncondensing

Storage humidity

10% to 90% noncondensing

Package Contents

• Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports

• Power adapter

• RJ-45 Ethernet cable

• Quick installation guide

  35 €  PAP2T Internet Phone Adapter with 2 VoIP Ports   PAP2T Internet Phone Adapter with 2 VoIP Ports
Available online payment methods
               
Copyright © 2020 The My Shop: Online shop for you!
Call us in USA (1) 360 717 2799 Call us in UK (44) 20 7148 7760 Call us in Italy (39) 069 291 6398 Call us in Spain (34) 851 000 290
Call us in Argentina (54) 11 5239 1330 # 25209 Call us in Brasil (55) 11 3323 1169 # 25209 Call us in Chile (56) 2 595 2806 # 25209
Call us in Guatemala (502) 2 353 3155 # 25209 Call us in Peru (51) 1 705 9745 # 25209 Call us in Panama (507) 202 0400 # 25209
E-mail [email protected]