Hardware

If you are a fan of the popular Sanrio cat and you like to view your friends while you chat with them, you should to have the most cute webcam that you can see. The first webcam based in the Hello Kitty!

Cute Hello Kitty webcam mounted on heart shaped stand/clip. This camera comes in presentation box as shown and is a driverless webcam so it operates with Windows XP/Vista and Windows 7. This is a standard resolution webcam providing 30 frames per second at a resolution of 640 x 480 and is ideal for video chat programs like Skype/ooVoo/MSN messenger and other instant messaging systems. There is no microphone so a seperate one will be needed if you dont already have one.

The clip will easily attach to most laptop computers and when used as a stand allows a great deal of positioning adjustment. The camera is focussed by turning the lens on the front.

A CD is inluded with lots of FREE software and also shareware programs to try before deciding to if suitable for your needs.

Features:

• High quality Hello Kitty Cartoon Webcam
• Mountable on notebook and PC monitor
• Image effect clearly
• Smooth uninterrupted image
• High frame rate video display up to 30 fps
• Live video and photo capture
• Support QQ, MSN messenger, Yahoo messenger, Skype, Trademanager, etc.
• Driverless, Plug and Play
• Automatic power control
• USB 2.0 interface (includes 4 foot ~ 1 m USB cable)
• Support Windows 98/2000/ME/XP/Vista/7/8, Mac OS 10.x or above
• PC with Pentium 300 MHz or above

Specifications:

• Sensor: High-resolution CMOS color photosensitive chip sensor with CCD effect
• Lens: Full layer glass lens
• Pixels: 0.3 MP (VGA: 640 × 480)
• Frame rate: 30 fps
• Manual focus
• Focus range: 6 cm to infinity
• Angle: 360°
• Interface: USB 2.0
• Height: 4 3/8" (11 cm)
• Color: pink

• Three matched 2 GB modules for use in high performance Intel Core i7 Triple Channel systems
• Outrageously fast 2000 MHz performance using 6GB of memory
• Ultra-low 8-8-8-24 latency
• Intel XMP (Extreme Memory Profile) Support
• Airflow Fan
• Density: 6 GB (3 x 2 GB Module)
• Speed: 2000MHz
• Timing: 8-8-8-24
• Type: DDR3
• Format: DIMM
• Pin Out: 240
• Pin Voltage: (low-voltage) 1.65 V

The incredible cost savings of Internet telephone service isn't limited only to those with IP phones. Part of Cisco Small Business Voice Gateways and ATAs, the PAP2T offers the benefits of high-quality voice over IP (VoIP) without the need to upgrade your existing analog phones.

The PAP2T features two standard analog, fax-friendly telephone ports which operate as separate lines, complete with individual phone numbers. All the features you've come to expect are here, such as call waiting, caller ID, voicemail, and more. It's easy to select your preferred free local-dialing area code, or even add a virtual number from anywhere to be forwarded to your Internet phone.

Additional features of the Cisco PAP2T Internet Phone Adapter include:

• High-quality, feature-rich telephone service over your broadband Internet connection
• Two standard telephone ports for analog phones or fax machines that serve as separate lines, complete with unique phone numbers
• Up to 256-bit AES encryption for data transmissions and password-protected administrative options
• Compatibility with all common telephone features such as caller ID, call waiting and voicemail.

Feature-Rich VoIP Service Through Your High-Speed Internet Connection!

Highlights

• Enables high-quality feature-rich voice over IP (VoIP) service through your broadband Internet connection
• Dual standard telephone ports for use with analog phones or fax machines, with independent phone numbers
• High-quality, clear-sounding voice, using advanced voice quality of service (QoS) capability
• Compatible with all common telephone features, such as caller ID, call waiting, and voicemail

Figure 1. Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports

Product Overview

The Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports (Figure 1) enables high-quality feature-rich VoIP service through your broadband Internet connection. Just plug it into your home router or gateway and use the two standard telephone ports to connect analog phones or fax machines. Each phone port operates independently, with separate phone service and phone numbers, like having two telephone lines. You'll get clear reception and reliable fax connections, even while using the Internet.
With Internet telephony, along with low domestic and international phone rates, impressive arrays of special telephone features are available. Choose your preferred local dialing number, regardless of where you live. Or add a virtual telephone number to have forwarded to your Internet phone. You can even add a toll-free number. The Cisco PAP2T Internet Phone Adapter is compatible with these and all of the other special telephone features that are available from your Internet telephone service provider, such as caller ID, call waiting, voicemail, call forwarding, distinctive ring, and much more.

Features

Telephony:

 • Two voice ports (RJ-11) for analog phones or fax machines
 • Impedance agnostics - eight configurable settings
 • Call waiting, cancel call waiting, call waiting caller ID
 • Caller ID with name/number (multinational variants)
 • Caller ID blocking
 • Call forwarding: no answer, busy, all
 • Do not disturb
 • Call transfer
 • Three-way conference calling with local mixing
 • Message waiting indication - visual and tone based
 • Call return
 • Call back on busy
 • Call blocking with toll restriction
 • Delayed disconnect
 • Distinctive ringing - calling and called number
 • Off-hook warning tone
 • Selective/anonymous call rejection
 • Hot line and warm line calling
 • Speed dialing of eight numbers/addresses
 • Music on hold

Specifications:

Table 1 contains the specifications and package contents for the Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports.

Table 1. Specifications for the Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports

This completely innocent looking PC mouse includes the most state of the art gsm bugging device technology and will allow you to monitor any audio / sound at the target location with crystal clear clarity.
Our new GSM mouse bug is unlike any other similar product on the market due to many of the cutting edge features that have been packed into it.
Some of the features include battery back-up, call or SMS/text  message alert based on movement and sound detection!

Features:

• Voice active monitoring
• Built-in adjustable sensitivity (-75 db; 4 level: low, middle, high, super high) voice active microphone
• Built-in High sensitivity monitoring amplifier microphone
• Crystal clear audio / sound quality
• Built-in phone number filter function, other phone will not allowed to monitoring
• Can used SMS to set active or deactivate sound active mode
• Built-in shock alert active function, will call and send SMS when detect shock alert (3 SMS alert number and 1 calling alert number)
• Easy to operate, just install SIM card and SMS setting for all function modes
• Built-in rechargeable polymer Li-ion battery (420 mAh)
• USB charging ways, can be used while charging
• Built-in charger circuit allowed using in charge mode.

GSM mouse bug User Manual

Hello Kitty design optical USB mouse with blue/red light.

• Plug & Play: simply plug the USB cable into an available USB port on your laptop or desktop computer and the mouse will be used immediately thereafter (don't need driver and installation)
• compatible with Windows (9x/2k/ME/XP/Vista/NT 4.0/7/8/8.1/10) and Mac OS X operating systems
• 1200 DPI optical resolution
• 3 button layout, scroll wheel acts as third button
• with USB plug, about 143 cm length of cable
• Size: 7.5 × 6.5 × 3 cm
• Weight: 64 g

Product Name: Elpida 2 GB 2Rx8 PC3-10600S-9-10-F1
Manufacturer: ELPIDA
Form Factor: DD3 SO-DIMM
Memory Capacity: 2 GB
Bus Speed: PC3-10600 (DDR3-1333) 1333 Mhz
Number of Pins: 204
Error Correction: Non-ECC
Voltage: 1.5 V
Organization: 256M words × 64 bits, 2 ranks
Chip Composition: J1108BFBG-DJ-F × 16
Latency (CL - tRCD - tRP): 9 - 9 - 9
PCB Height: 30 mm
Operating Case Temperature Range: 0 ~ 95 ℃
Part Number: EBJ21UE8BFU0-DJ-F
Country/Region of Manufacture: Taiwan
Condition: Used
Compatible: Sony / HP / Apple laptop

PS/2 hardware keylogger released! The most advanced PS/2 hardware keylogger available on the market. This keystroke recorder comes in a standard version - 8 MB memory capacity, 8,000,000 keystrokes (over 4,000 pages of text), and a Venom version 2 billion keystrokes (over 1 million pages of text), organized into an advanced flash FAT file system.

This hardware keylogger features a text menu with loads of options for analyzing recorded data. Additionally, the USB Download Accelerator is included for super-fast retrieving of logged data. The keystroke logger is completely transparent to computer operation, no software or drivers are required. Supports national keyboard layouts.

Features

* Huge memory capacity, organized as an advanced flash FAT file system
* Advanced text menu for viewing recorded data, includes Net Detective, Phrase Search, Key Filtering, Unplug Counter and more!
* Super fast memory contents download with USB Download Accelerator (included)
* Invisible to computer operation, undetectable for security scanners
* No software or drivers required, Windows & Linux compatible
* Quick and easy national layout support
* Ultra compact and discrete, only 1.9" (48 mm) long

Applications

* Observe WWW, E-mail & chat usage by children and employees
* Monitor employee productivity
* Protect your child from on-line hazards and predators
* Save a copy of typed text
* ...and several more, see keystroke recorder benefits

The Bitmain Antminer U1 is a USB Bitcoin (BTC) miner that hashes at 1.6 GH/s, but overclocks up to 2.2 GH/s. The miner is very power efficient, pulling only 2 watts. This is a great way to enter the bitcoin mining game. Plug it into a USB, run CGMiner or BFGMiner, and you're set!

Specifications:

• For only Bitcoin mining
• Icuras support SHA256 algorithm
• 2014 model: v1.1 board
• Default hash rate: 1.6 GH/s, can overclock by command up to 2.2 GH/s
• Power consumption: 2 W on USB 5V @ 1.6G
• Power supply: 5 V DC input (from USB)
• Size: 60 × 25 × 10 mm

How to use?

You can use with your computer / laptop (supported OS: Windows, Linux, Mac OS X) or direct with router (OpenWrt / DD-WRT).
Required driver: CP210x USB
Plug in your Antniner U1 to a USB port on your computer / laptop / router.
Start mining software:

cgminer.exe --bmsc-options 115200:20 -o pool_url:pool_port -u worker_name -p worker_password --bmsc-freq 0781
bfgminer.exe -o pool_url:pool_port -u worker_name -p worker_password -S antminer:all --set-device antminer:clock=x0781

To overclock your Antniner U1, you will change that last part of the running parameter. The number following bmsc-freq and antminer:clock=x will change:

• for 1.6 GH/s use 0781 (default)
• for 1.8 GH/s use 0881
• for 2.0 GH/s use 0981
• for 2.2 GH/s use 0A81

Keep in mind that the Antminer gets very hot very quickly when you overclock. Your must add additional cooling to your device. I recommend a strong fan blowing cool air directly onto your Antminer U1!